Wrote this article a long ago but during solving a problem recently thought of sharing this article publicly. Hope it will help some contestants to understand the idea clearly.

Digit dp is a very easy technique and also useful to solve many dynamic programming problems. Seeing the name “Digit DP” it’s easy to guess that we are going to do something using the digits. Yes we are actually going to play with digits. Let’s explain the concept using a classical problem.

#### Problem

How many numbers **x** are there in the range **a** to **b**, where the digit **d** occurs exactly **k** times in **x**? There may have several solutions including number theory or combinatorics, but let’s see how we can solve this problem using digit dp.

#### Solve for range (zero to a)

Using digit dp we always focus on building a number satisfying all the conditions. If we finally manage to build that number then we say, yes we have got one ;-) But how we’ll build that number? For the time being let’s say **a** is zero. So we need to find the total numbers which are not greater than **b** and also satisfy the given conditions.

#### Building a sequence of digits

Let’s consider the number as a sequence of digits. Let’s name the sequence **sq**. Initially **sq** is empty. We’ll try to add new digits from left to right to build the sequence. In each recursive call we’ll place a digit in our current position and will call recursively to add a digit in the next position. But can we place any of the digits from **0** to **9** in our current position? Of course not, because we need to make sure that the number is not getting larger than **b**.

#### Information we need to place a digit at the current position

Let’s say during the building of the sequence, currently we are at position **pos**. We have already placed some digits in position from **1** to **pos-1**. So now we are trying to place a digit at current position **pos**. If we knew the whole sequence we have build so far till position **pos-1** then we could easily find out which digits we can place now. But how?

You can see that, in the sequence **sq** the left most digit is actually the most significant digit. And the significance get decreased from left to right. So if there exist any position **t** (1<=t<pos) where sq[t] < b[t] then we can place any digit in our current position. Because the sequence has already become smaller than **b** no matter which digit we place in the later positions. Note, b[t] means the digit at position **t** at number **b**.

But if there was no **t** that satisfy that condition then at position **pos**, we can’t place any digit greater than b[pos]. Because then the number will become larger than **b**.

#### Do we really need the whole sequence?

Now imagine, do we really need that whole sequence to find if a valid **t** exist? If we placed any digit in our previous position which was smaller than its corresponding digit in **b** then couldn’t we just pass the information somehow so that we can use it later? Yes, using an extra parameter **f1**(true/false) in our function we can handle that. Whenever we place a digit at position **t** which is smaller than b[t] we can make **f1** = **1** for the next recursive call. So whenever we are at any position later, we don’t actually need the whole sequence. Using the value of **f1** we can know if the sequence have already become smaller than **b**.

#### Extra condition

So far we focused on building the sequence **sq**, but we have forgotten that there is an extra condition which is, digit **d** will have to occur exactly **k** times in sequence **sq**. We need another parameter **cnt**. **cnt** is basically the number of times we have placed digit **d** so far in our sequence **sq**. Whenever we place digit **d** in our sequence **sq** we just increment **cnt** in our next recursive call.

In the base case when we have built the whole sequence we just need to check if **cnt** is equal to **k**. If it is then we return **1**, otherwise we return **0**.

#### Final DP States

If we have understood everything so far then it's easy to see that we need total three states for DP memoization. At which position we are, if the number has already become smaller than **b** and the frequency of digit **d** till now.

#### Solve for range (a to b)

Using the above approach we can find the total valid numbers in the range **0** to **b**. But in the original problem the range was actually **a** to **b**. How to handle that? Well, first we can find the result for range **0** to **b** and then just remove the result for range **0** to **a-1**. Then what we are left off is actually the result from range **a** to **b**.

#### How to solve for range a to b in a single recursion?

In the above approach we used an extra parameter **f1** which helped us to make sure the sequence is not getting larger than **b**. Can’t we do the similar thing so that the sequence does not become smaller than **a**? Yes of course. For that, we need to maintain an extra parameter **f2** which will say if there exist a position **t** such that sq[t] > a[t]. Depending on the value of **f2** we can select the digits in our current position so that the sequence does not become smaller than **a**. Note: We also have to maintain the condition for **f1** parallely so that the sequence remains valid.

Please check this to find the sample code of our initial approach.

#### Problem List

- Investigation
- LIDS
- Magic Numbers
- Palindromic Numbers
- Chef and Digits
- Maximum Product
- Cantor
- Digit Count
- Logan and DIGIT IMMUNE numbers
- Sanvi and Magical Numbers
- Sum of Digits
- Digit Sum
- Ra-One Numbers
- LUCIFER Number
- 369 Numbers
- Chef and special numbers
- Perfect Number
- The Great Ninja War

Is there some other problems? Some suggestions are really welcomed :)

I've had this problem for a while, and most probably it's solvable with Digit DP. Maybe it's not, but I haven't found a solution:

Given a integer

X, find the number of integersiin [l,r] such thati≤Xandrev(i) ≤X, where rev(i) is the number formed by reversing the digits of i. For example, rev(1560) = 651 and rev(156) = 651 (not 6510, 65100, etc)Unfortunately I can remember neither the source nor the limits, but probably

X< 10^{18}or something.I have found a solution but not fully sure about it.

First of all if X < l then the answer is zero. And i must be <= L where L = min(r, X). Now let’s solve the problem for range (0, L). Let's Len = number of digits in L. Now we can divide the solution in two parts.

In the first part, for each k (1 <= k < Len) we'll try to find the number of valid i which has k digit in it's representation. We can do this easily because if i <= X then rev(i) <= will also hold. As total number of digits is smaller. So we can just ignore that rev(i) <= X condition for this part.

Let's sum1 is the summation of result for each k (1 <= k < Len). Now each of the number x in sum1 will contribute to the final result twice. Because for each x we can add some trailing zeroes in x to make it a Len digit number. As we are adding some trailing zeroes the conditions i <= X and rev(i) <= X will still hold.

Now we’ll solve the second part where we need to find the number of Len digit number which has no leading or trailing zeroes. I'll explain this with an example. Let's L = 372967524. Let's divide this L into 3 parts. P1 = 372, P2 = 9, P3 = 67524. Here P2 has only one digit.

Let's build a number i whose first 3 digit is fixed (same as P1). And at the 4th position we place a smaller digit than P2 (for example 8). So i now looks like this 3 7 2 8 _ _ _ _ _. So i has already become less than X. It doesn't matter what we place in the remaining 5 positions. Condition i <= X will always satisfy. So now we focus on selecting 5 digits for the remaining position such that rev(i) <= X satisfy.

The reverse of the trailing 5 digits of i is actually the 5 leading digits of rev(i). As we don't need to worry about i <= L condition any more, so now we'll do digit DP to find this first 5 leading digits of rev(i), comparing to the first 5 digits in X. We need to handle one more case here. As we have already placed the leading 4 digits in i whose reverse is actually the trailing 4 digits of rev(i), so after choosing the leading 5 digits in rev(i) we just need to check if the whole rev(i) satisfy the condition (<= X) or not.

As i said above, we’ll have to divide L in 3 parts. For each digit in L we’ll select it as P2. And the remaining two parts as P1 and P2. Then we repeat the same approach each time. The summation of all these results(including the one in part1) is our final answer.

Check BOI(Baltic) 2013 Numbers, i really liked that one.

Link: https://oj.uz/problem/view/BOI13_numbers

I think you can add this problem. I solved it using Digit DP. I really liked this problem.

UPD: Another interesting problem on DIGIT DP https://www.hackerrank.com/contests/morgan-stanley-codeathon-2017/challenges/dreamplay-and-clubbing/problem

Nice problem. Thank you :)

Beautiful problem! I used digit dp, bitmask, binary search- all in 1 problem!!

Auto comment: topic has been updated by flash_7 (previous revision, new revision, compare).Nice explanation. Keep up the good work :) .

One may find this interesting.

Solved it. A very nice problem. Thanks Vai :)

you can also add this

How to solve LIDS ?

The maximum length of LIDS can be at max 10. So we can check for each length k, in how many ways we can make a number whose LIDS is k. We can then print the result we found for the maximum k.

I’m describing the states we need to find the number of ways we can build an LIDS of length k.

At which position we are.

Has the sequence already become less than y? (0 or 1)

Has the sequence already become greater than x? (0 or 1)

Did we place at least one non zero digit so far? (To handle the first digit of LIDS)

Last digit we have placed in the sequence.

Number of total digit in the LIDS sequence.

Basically we build two sequence parallelly. One is definitely the whole sequence, another one is the LIDS sequence (Which is the sub sequence of the original sequence). When ever we select a digit we want to place, it becomes the last digit of the original sequence till now. But we can also choose if we want to consider that digit in our LIDS sequence or not.

Thank you.

Why do need the fourth state [email protected]flash_7

To make sure we don't place any leading zeroes. Because if we build a number of length k with some leading zeroes then that number is not really a number of length k.

Yes, I debugged my code and was getting a WA for

1

10000 10000

my answer was 1,1 because it did not consider zeros in LIDS.

Actual answer is 1,5.

can u code it ? its hard to implement.

Could you provide more details about how the transitions of this DP are ? Or the accepted code so I could try to understand ?

Thanks !

You probably don't need this anymore, but here is a solution: https://ideone.com/QGXuo9

Here is the solution to

LIDSproblem using 3 flags for people who are looking for it.CodeSome additional problems:-

Digit Sum

RAONE

LUCIFER

NUMTSN

GONE

Chef and special numbers

How can I optimize Chef and special numbers problem.

here is my code

Auto comment: topic has been updated by flash_7 (previous revision, new revision, compare).I just wrote a topic about a doubt in one question here: https://codeforces.cc/blog/entry/55105

I will read your topic now. Hope that helps me :)

Some questions that i believe that are solvable by Digit DP:

https://www.urionlinejudge.com.br/judge/pt/problems/view/1138 https://www.urionlinejudge.com.br/judge/pt/problems/view/2013 https://www.urionlinejudge.com.br/judge/pt/problems/view/1492

How to solve "palindromic numbers"?

Initially we have the space of all numbers

S= {0, 1, 2, 3, ..., 10^{17}}.This space is too big, so we want to reduce it.

From all that space we only need to consider the numbers with a special property (being palindrome)

P⊂S.Now let's consider another space where all of our original numbers are mapped into a different number

S_{2}= {f(0),f(1),f(2),f(3), ...,f(10^{17})}.There is no point in cosidering this new space

S_{2}instead of originalSif it has the same size.Can you think of

anymappingf:S⟶S_{2}that will make the size ofS_{2}manageable?Can't think of solution. Any more suggestions?

"So if there exist any position t (1<=t<pos) where sq[t] < b[t] then we can place any digit in our current position.

Because the sequence has already become smaller than b no matter which digit we place in the later positions" How is this true? If b = 5321 and current sq = 621, there exists a t such that sq[t] < b[t]. So in the current position pos, putting any digit will cause sq > b? Am I missing something?

Vaiya can you please sort the problems according to difficulty?

I didn't solve them all but here goes my order

Investigation

Sum of Digits

Digit Sum

Bomb

Ra-One Numbers

LUCIFER Number

G-One Numbers

Digit Count

Round Numbers

Fast Bit Calculations

Magic Numbers

Maximum Product

If you need help then you can look at this.How do I solve Maximum Product ?

Here's a gift :DIn the problem "Investigation" whats the logic behind taking the max remainder as 90 only? you have defined the dp states as dp[90][2][90][90]. why 90 ?Target2018

Since the sum of any number less than

`2^31`

will be less than 83(approx) so any k > 83 wont be able to divide the sum of numbers . So for`k > 83`

answer should always be 0. That's why we can take max remainder value as`90`

.My sol link :- Solution

Thanks :)

I have the same question The sum of digits of any number less than 2^31 will be less than 90 but the number itself should also be divisible by k So I think the remainder can be greater than 90 and it should be less than 10000 Can you please explain?

Since we are not checking the answer for k > 83 in the question because the answer for k > 83 will always be 0 as I explained above so if while creating a digit we are taking its mod with k (which is always less than 83) the max value of that state won't cross 90.

You can add this problem

919B - Perfect Number also can be solved by digit DP and it's very amazing if n not greater 10^6

how to solve https://codeforces.cc/gym/100886/problem/G ? please tell me the state of the dp

Take a look

thanks !

i have seen the solution , can you please explain the use of FLAG in dp state , how its helping?

Check the answer in the blog

Which way is more efficient? Double recursion call with 3 states or single recursion call with 4 states?

Can Anyone please provide solution for this tutorial also ? I am noob. Sorry for that.

I am having really hard time thinking about the time complexity of this approach can anyone please help

Can someone help me with the problem "Cantor". I am getting WA.I can't find my mistake. Link — https://ideone.com/ELiN2b

Your link is dead here's my solution

Found my mistake! Thank you.

what states are used in solving the problem(Cantor)

I solved it using 3 states

Auto comment: topic has been updated by flash_7 (previous revision, new revision, compare).Is Classy Numbers also comes in this category?

yes

It was the simplest problem of DIGIT DP.

could you explain the solution

dp states for Classy numbers I used: index,prev_sum

here prev_sum denotes the number of non zero digits. check out my submission : Solution

Here is my solution using digit DP 42675923, it may help you. There are quite a lot of cases to take care of.

The main idea is that for each interval

`[L, R]`

the answer is`F(R) - F(L - 1)`

. Where`F(x)`

equals the number ofclassyintegers from 0 to x.How to you calculate

`F(x)`

? Just using Dynamic Programming.For a number

x, the DP looks something like this:`dp[i][j][k][0]`

= number of integersless than xthat are`i`

digits long, end in`j`

and they have`k`

digits bigger than 0.`dp[i][j][k][1]`

= number of integersequal to xthat are`i`

digits long, end in`j`

and they have`k`

digits bigger than 0.jis going to be between`0..9`

andkin the range from`0..3`

, because a classy number contains no more than 3 non-zero digits.My dynamic has more states than the .Nik.'s but I think it's more intuitive. Hope it's going to help you.

https://www.hackerrank.com/topics/digit-dp this is a good tutorial

Easy to understand solution using the same template as described in the post.

Hope it helps :)

solution

I tried to solve the INVESTIGATION Link: https://vjudge.net/problem/LightOJ-1068 problem given above, i wrote the following solution https://code.hackerearth.com/aedc54l I am getting a wrong answer for test case : 1 1000 4 , the answer is given 64 but i am getting 74, could someone please help

You can look at this now, I wrote the solution here. Term final is the day after tomorrow, so can't look at your code now.

I am also facing same problem.

Superb explanation! Thanks.

Another really good question on digit dp: Link

Another good problem in digit dp Balanced Number

Why the for loop start from 0? let a = 100, d = 5, k = 1

Please correct me if I'm wrong, because one of the base cases is

`pos==num.size()`

, so there will will be state with,`050`

chosen right? this is representing number`50`

? and is that`005`

means it's number`5`

?, because we return 1 when`pos == num.size()`

so we have to fill each digit, this zero a bit difficult to understand.I too have the same doubt. @flash_7 ,could you please explain this? If we want digit 0,two times then 005,050 are also counted but that shouldn't be the case.

Yes, you are correct. 005 means 5 and 050 means 50. So the way i have written my code, it'll consider all the numbers <= N including the ones whose number of digits is less than the number of digits in N. So it'll work perfectly.

But when d = 0, my given code will produce an incorrect output. Because it'll count zero for the numbers who have leading zeroes. For example, for the number 005, it'll count zero two times. Which is wrong. Because we don't consider the leading zeroes in the decimal numbers. You have to handle this case separately.

How can we do that? We can use another boolean state, which will keep track if we have placed at least one non zero digits so far. If it's true in any state, then we'll count the zero in that state. Otherwise, we don't. Hope it helps you to understand.

Thanks bro :) .

flash_7 can you please tell me how to solve problem

6.Maximum Product

by digitDp as i am not able to get what should be the states though i have already solved this question using greedy approach solution but i want to know how it can be solved using digitDp or more precisely is it solvable using digitDp approach or not?

In question Investigation I have been using dp states as pos, flag, sum_of_digits, remainder_of_so_far_number.

So the dp size should be dp[32][2][10000][10000]

but this gives RTE and dp[32][2][101][101] passes.

But when k>100 this should give the wrong answer but it is passing My submission https://vjudge.net/solution/18823741 I can't understand why such dp size works?

just think about , what could be maximum sum of digits & does the value of k matters if it's greater than the sum of digits ?

Sum of digits maximum can be 100 only I know But the remainder_of_so_far_number can be greater than 100 upto value of k i.e.10000

so , if sod( sum of digits ) is < 100 & k >= 100 , these numbers will never be divisible by k according to this problem , right ? so , if k is >= 100 , we can simply print 0 , otherwise use dp , thus state gets reduced.

Thanks:) Got it

great :-)

What should be the dp state in Palindromic Numbers?

Problem Editorial

Can anyone please explain me as why this type of problem is called a DP, although we aren't using any memoisation , but rather doing pure recursive calls. Shouldn't it be rather termed as recursion ? Please let me know if I am missing out something.

Thanks a lot, it really helped !! @flash_7

flash_7 How To Solve Palindromic Numbers ??

It May Help you

Add ENCODING to the list.

@flash_7 I think you don't require this statement (Line:15) in implementation.

if(cnt > k) return 0;

Because you already do the check before calling recursive statement.

Can anyone please provide a solution of LIDS with explanation ?

Ive just encountered this post.

The most recent problem i came across which uses digit DP is Encoding.

Nice job but I think this method will not work if the digit d = 0. Let us take an example:- a = 1, b = 11, d = 0, k = 1.

If you want you can run your code and check that ans = 10 but it should be 1.

Reason is that it is also counting digits like 01, 02, 03.

To make this problem look perfect you can add d != 0.

Please let me know if you think i am right. Thanks in advance.

Can someone help in the question that was asked in the long challenge of CodeChef in August 2019.

Problem Code -LINK — https://www.codechef.com/AUG19B/problems/ENCODING`ENCODING`

Hello! There is a very detailed tutorial for this problem on Codechef. If you have further questions, feel free to ask(I was the setter).

Any video tutorials regarding digit dp that will be very helpful. Editorial must written in points and explain with an example

A good problem for Digit DP: https://codeforces.cc/contest/288/problem/E

Thanks for this Article. This following problem is good to be added. Playing with Digits(Hackerearth)

can anyone help me with DIGIT COUNT I am not getting states for my dp array please help

dp[index][last_digit_placed][flag]

thank you so much this is really helpful my digitdp journy has started

Really good article about digit DP.

E — Almost Everywhere Zero, AtcoderBegCon — 154

Similar question to the one discussed in the article. Thank you a lot for the very well explained article!

This is also a nice problem as far as I think. Solved now after learning this topic right now. https://codeforces.cc/problemset/problem/1036/C

I have made a video on digit DP. Digit Dp Link

it is not working for [email protected]_7

Can someone pointout mistake in this? Code is giving correct output for first 2 test cases but for third it is giving 74 and answer is 64.

there is one more state you need that is the actual digit.of course it will be <= 8 * (8 * 9) = 72 because you will mod it by k,also you can imagine that if k > 72 there is no possible answer.so answer will be equal to zero.

How to solve this problem : calculate the no of times digit d occurs in l to r? sample input : l = 1, r = 22, d = 2 sample output : 6 (2, 12, 20, 21, 22) frequency of 2 is 6. I know a solution having complexty (len(n) * len(n)).

Can you send the problem link? I want to try my idea.

Based on just what you have mentioned, I have a sketch of a solution. Here

I'm curious whether this is correct. It could require some tweaks, as for case when d = 0, It also counts the leading zeros.

Thanks for your reply.I also did in the same way.

If someone prefers videos, here are few problems and their solutions :

Problems (approx 13-14) with solution : https://www.youtube.com/watch?v=Hsnbaixm1A4

Theory : https://www.youtube.com/watch?v=5CLtoXus7O4

thank you <3

Thank you so much

Are questions given in the end are sorted according to the increasing level of difficulty ??

Thank You for the informative article flash_7

Investigation

Can somebody tell me the

dp statefor the above problem?My dp state is

`dp[pos][rem][f][rem2] = count of numbers when we are at position pos with a remainder rem(sum of digits mod K) and with a remainder rem2(the actual number mod K)`

The`f`

in my dp state tells us whether the number has already become smaller than the original number or not. Java CodeAlthough the approach is right, my solution got

Memory Limit Exceeded. Any ideas for optimizations?Can anyone tell what I'm doing wrong in the question 1-Investigation, code link- https://pastebin.com/sd44xj20

someguy you initialized 'tight' with 0 instead of 1 in your dp function!

the0dd1out thanks, man, it worked out. Also, can you tell what's wrong with my solution of question-Magic numbers, code link- https://pastebin.com/N4HbdtQx

This code doesn't work if d = 0.

Is any editorial available for these problems? If yes please paste the link here. Sorry for Spamming.

flash_7 How to solve maximum product using digit dp .Here is my solution but don't know where it is going wrong

I think it's just like backtracking because it try all the number <= R. Where do I misunderstanding?

some one help me. I am getting wrong answer for quesation https://www.spoj.com/problems/NUMTSN/

code: https://ide.geeksforgeeks.org/gbuVb8k3Uu

you can also add this